Kestrin Underfloor Heating
Solid/Screed System
TELEPHONE 01403 756777
 

Home: Contact: FAQ : Links: Site Map

   
 

Solid Screed Systems

General Fixing

The general fixing we use is the clip rail and U-Clip type and is the most convenient in majority applications. However there are several methods available for securing the underfloor heating pipe work within a screed or concrete floor. For more information regarding these type please View Fact Sheet

 

Insulation

Most Types of construction require insulation below to meet the requirements of the Building Regulations. In all cases, (including intermediate floors) insulation must be provided under the floor heating system to reduce downward heat transmission and to improve response time and running costs. The insulation must be sufficient to comply with the Building regulations and we are happy to quote for most types insulation in the specification, there are some types of insulation that we do not recommend and we will suggest alternatives where appropriate.

Heat Output:

The maximum heat output of a solid floor system is 100w/m² This output should be checked against the heat losses of the building given by the Architect and/or consulting engineer. This is particularly important in refurbishments and rooms with large glazed areas and/or high ceilings.

 

 

Kestrin Limited
Landmark House
75 Station Road
Horsham
West Sussex
RH13 5EX

© Kestrin Limited

Tel: 01403 756777
Fax: 01403 756888
email:info@kestrin.co.uk

Uponor WirsboThe Underfloo Heating Manufacturers Association